LH Ovulation Test :
How To Use It?
[Steps]
The instructions must be read thoroughly before testing, and the test cards and urine samples should be returned to room temperature (18 ° C - 30 ° C) before use.
1. Remove the test card from the original packaging foil pouch and use it as soon as possible within 1 hour.
2. Lay the test card flat, use a straw to dip the urine into the S area.
4. Wait for the purple band to appear, and the test results should be read within 15 minutes. After 15 minutes, the judgment was invalid.
[Result judgment]
Positive (+): Two red bands appear.
One is located in the test area (C) and the other is located in the quality control area (T).
And the T line is thicker than the C line, or the C and T lines are both thick.
Negative (-): One or two red bands appear.
One is in the test area (C) and the other is in the quality control area (T), but the T line is lighter than the C line, or there is no T line.
Invalid: There is no red band in the quality control area (C), indicating that the incorrect operation process or the reagent card has deteriorated. In this case, the instructions should be read again and retested with new reagent cards.
If the problem persists, stop using the lot number immediately and contact your local supplier.
Note: The ribbon of the reagent card and the test card can show the color depth due to the amount of LH in the urine.
The result is judged according to the above criteria.
Package List:
5PCS Ovulation Test Cards